Top civil engineering interview questions

-
Top MOST INTERVIEW QUESTION ANSWERS IN CIVIL ENGINEERING 
















Comments

Post a Comment

Popular posts from this blog

CPM and PERT MCQ'S

-
 1. The numbering of the nodes in A-O-A is done  A.From left to right B.From Right to Left C.Randomly  D.On the basis of the duration of the activity 2.Which of the following is not the part of Risk Control A.Execution of the risk response strategy B.Monitoring of triggering events C.Initiating contingency plans D.Not watching for new risks 3. Conflict occurrence in projects is A.Unavoidable B.Depend on type of project C.Avoidable D.Depends on culture 4. Outsourced projects are susceptible to conflicts as A.People get less pay in these projects and work is more B.More work pressure and less time horizon C.These projects are away from home location D.People are unaccustomed to working together and have different values  5. Who creates the project team? A. Factory manager B. Operation manager C. Project manager D.Purchase Manager 6. Project Manager must ensure that it develops appropriate trade off/s as A. Time, cost and performance B. Time, value and performance C.Men...
Read more

Surveying Mcq's For JE/AE

-
   1.The curvature of the earth's surface, is taken into account only if the extent of survey is more than a).100 sq km b).160 sq km c).200 sq km d).260 sq km 2.Which of the following methods of contouring is most suitable for a hilly terrain? a).Direct method b).Square method c).Tachometric method d).Cross-sections method 3.The size of a plane table is a).750 mm × 900 mm b).600 mm × 750 mm c).450 mm × 600 mm d).300 mm × 450 mm 4.The angle between the plane of the equator and the plane of the ecliptic, is known as obliquity of the ecliptic and its value is a).22° 30' b).23° 27' c).23° 30' d).24° 0' 5.For a Tachometer the additive and multiplying Constants are Respectively a).0 and 100 b).100 and 0 c).0 and 0 d).100 and 100 6.Three point problem can be solved by a).Tracing paper method b).Bessels method c).Lehman’s method d).all of the above 7. International Date Line Is Located Along a).Standard meridia b).Greenwich meridian c).Equator d). 180° Longitude 8.The lengt...
Read more

Surveying Mcq's For Civil engineering

-
Image
1. The direction of a line relative to a given meridian is called: a) Bearing b) Declination c) Angle d) Dip 2. How many types of a compass are used in surveying? a) 4 b) 2 c) 3 d) 5 3. ___________ bearing is measured in the direction of survey. a) Primary b) First c) Fore d) Front 4. In a reduced bearing system, bearing is measured from: a) Nearest one (North or South) b) South c) West d) North 5. Prismatic Compass is based on the reduced bearing system. a) True b) False 6. The bearing of line AB as shown below is represented in reduced bearing as: a) N150°         b) E60°S c) S30° d) S30°E 7. How many meridians are used in surveying? a) 6 b) 8 c) 3 d) 5 8. ________ is a term used that prevents the needle from pointing to the magnetic North in a given locality. a) Local attraction b) Declination c) Deviation d) Local distraction 9. ___________ line is the line drawn through points of the same declination. a) Polygonic b) Isogonic c) Syngonic d) Agonic 10. Which...
Read more